Product Description產(chǎn)品描述

J-Series Dia-Vac® gaseous diaphragm sampling pumps are compley self contained and may be used for either built-in or portable applications. These economical oil-free, contamination-free and leak-free diaphragm pumps offer up to 13 SLPM, 23 InHg, and 29 PSIG in a single head configuration. J-Series Dia-Vac® pumps are exceptionally quiet and are available with Aluminum or Teflon-coated Aluminum wetted parts. They are an ideal choice for OEM customers.
J系列DIA-VAC®氣體采樣泵可以*內部安裝，可以內置或便攜式應用。經(jīng)濟無油，無污染和無泄漏隔膜泵，流量高達13 SLPM，23英寸汞柱，并且單頭配置29 PSIG。J系列DIA-VAC®泵是格外安靜，鋁或聚四氟乙烯涂層鋁制零部件。是OEM客戶的理想選擇。

J-Series Dia-Vac® Performance
J系列DIA-VAC®性能

美國ADI氣泵J系列DIA-VAC泵

ADI’s gas sampling Dia-Vac® Pumps can pass your gas at the speed of need! Due to an increased interest in reducing the pressure, vacuum, and/or flow on the Dia-Vac^® pumps, our engineers designed a modified eccentric design. This allows you to customize your Dia-Vac^®pump to meet your application requirements while at the same time increasing the diaphragm and bearing life. The standard eccentric size is 0.160 on the J-Series Dia-Vac® Pump.

Please note that the chart below is not meant to be read as a combination of pressure and vacuum at the same time, only pressure or vacuum.

ADI公司DIA-VAC®的氣體采樣泵可以您的速度需求！由于對于降低壓力，增加真空度以及流量的興趣，我們的工程師設計的改性偏心設計。這允許您自定義您的Dia-Vac^® 泵，以滿足您的應用需求，同時增加隔膜和軸承壽命。標準偏心大小為0.160的 J系列DIA-VAC®泵。

請注意，下面的圖表并不是在相同的時間的壓力和真空的組合，僅僅壓力或真空。

美國ADI氣泵J系列DIA-VAC泵

    試驗結果被平均化，并且因此，應考慮近似的。

• 與316SS頭，聚四氟乙烯進行的測試^®在75°F隔膜，1/4英寸直徑的軟管點¯x5英尺線，采用STD。在60赫茲1725轉電機。
• 這些測試結果僅供參考，并旨在幫助確定哪些泵購買時向用戶提供信息。實際的泵性能將取決于用戶的應用程序。
• 對于50赫茲的運行，由17％減少產(chǎn)量